You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
gbj_tester
Ok getting a little confused trying to lace up a 2nd hand set of hubs to match the spoke marks on the flanges. The spokes (j bend) with the heads on the inside seemed to have been previously laced trailing to the left (rear of the bike ) on the drive side and leading to the left (front of the bike ) on the non drive side. Is this correct? It means they are effectively crossing in opposite directions. Following the park tools lacing pattern I thought they should be pointing in the same direction once the hub is twisted correctly
Thanks