You are reading a single comment by @ItsHuddo and its replies.
Click here to read the full conversation.
-
While we're here, have you ever seen someone use one HS33 lever paired up with two disc calipers (via a splitter) to make one handed (f&r) braking? We have a disabled customer and I'm led to believe that this is a viable solution (also for cargo trikes)
ItsHuddo-
Not cheap but Hope make a brake with separate levers for each brake, both on one hand
-
Yes. Bure requires a lot of modding, You'll want double banjo bolt fitting (goodridge) and the right crush washers.
@JacqueLucque
Hose will always be the problem. I always went for old Hope hoses, or Goodridge.
PhilDAS
Chak
The Magura stuff isn't too expensive, but it is quite hard finding them in long enough lengths.
Alternatively, you can use Goodridge hoses, which are pretty pimp, but you do end up paying.
I do run a Shigura setup, and have tried with multiple levers and calipers to see what works best.
Curiously, it's the cheaper Shimano levers which work best with the 4 pot calipers. Lot of flex though.
It's an interesting experiment, but frankly, neither are as good as with their respective levers.
I just hate Magura lever shape.