You are reading a single comment by @___freddie and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
___freddie
Brommers
If the threads fit together like this (might have to take that rubber grommet off to check):
then they're probably the same, in which case you could cut the longer one down a bit to fit. In my experience plumbing threads are all over the shop with loads of "standards" in use, and that's not even counting manufacturer's own weird threads.
tl:dr - get a new spout from the same manufacturer, or get a new tap. Or maybe it'll fit with a trim. I'd bet the farm on no adaptor existing.