You are reading a single comment by @konastab01 and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
konastab01
Have the non fuel M18 RO.
Part of it broke after a week (look back in this thread, I winged about it a year ago), got a replacement, then did it again. Basically the pad brake is just a thin bit of plastic it wears out very fast if you ever lift up the sander or turn it on a microsecond before contacting the surface.
Have learned to just not do that. Still have an ANCIENT (90s?) Dewalt corded RO that a mate gave us, replaced the bearings, cleaned the brushs works like a champ, but has always had no pad brake, so guess just modern ones are a luxury.
THe M18 RO has done honestly over a 120 maybe 150 hours use by this point (1 year?), walls, floors, endless things that it really wasn't designed for. With a 5.0 M18 pack its heavy but is actually an incredibly good shape, you can hold it about 4 different ways and does get into some tight gaps if you turn it just so. For £60 or £80 for the bare tool, still worth it. 1x 5.0h pack = more sanding than you could realistically do in a day before your arm falls off TBH. So the benefits of brushless being more powerful/less battery usage aren't super relavent on this tool.