Motorcycle and Scooter appreciation

Posted on
Page
of 1,062
First Prev
/ 1,062
Last Next
  • My dr will do 120kph GPS on nobbies.

  • Ah yea, your rotation will be affected significantly

    ... whereas all the 2 smokers are bouncing off the limiter in the air.

  • I think I hit 90mph indicated on my DR350 on the motorway on road tyres, but it was awful.

    Geared way down and aggressive knobblies I prefer keeping it below 70mph.

  • Oh I'm not saying it was good. But possible.

  • I paid for the whole clock so imma use it

  • So will you be when you hit something big with not enough gas…. ;)

    Front end up, tap the back brake. Rear end up pin the gas. If you have a very sharp lip, you need more gas not less on take off. That felt counterintuitive for ages for me. Good work for getting out - my Mx track days are over I reckon!

  • Front end up, tap the back brake. Rear end up pin the gas.

    That makes a lot of sense. I also went on the enduro loop in the afternoon when the expert group was MXing and people were starting to get tired. Enjoyed it a lot more than last time so will do things that way around again.

    The CRF450, well my sanitised L version, is so easy to ride. Bags of torque everywhere, could probably leave it in 3rd for a whole lap and ride it like an automatic. I might have been looking on ebay for vans again...


    1 Attachment

    • 20220911_171426.jpg
  • As much as I’m desperate to piss off into the sunset on the DR with a saddle bag… the van has been so useful every time someone has needed it, that I wish you luck finding an affordable one!

  • It is insurance season again.

    Seems to be a complete roll of the dice with quotes.
    Auto-Renewal was £260 (down a fiver from last year)

    Did a direct quote and it came back as £290, without the £70 breakdown cover (so nearly £100 more than last year)

    Tapped up the meerkats and got lots of quotes under £150 (without breakdown)
    Went to Carole Nash directly and got a £300+ quote using the same details as the comparison site.
    Followed the comparison site links and got it for £145.

    Getting closer to the old TransAlp premiums (680cc, £90/year)
    (did some shit maths and the Transy insurance was £1.52 per hrspwr and the Trumpet is £1.07)

  • What did BikeSure offer?

  • Someone ought to do it


    1 Attachment

    • E8F101AB-FAB6-4F90-B1FA-9D0DDE94A6FC.png
  • They only seem to do it over the phone, and I get anxious speaking to people.

    (TMI: I am having a terribly day, full blown anxiety attack, and struggling with most normal functions)

  • Try Peter James Insurance.

  • Ah I see. Good luck :/

  • I fell out with Peter James after being told that the unexplained £15 'additional' premium on my renewal notice - that is, additional to the annual increase in premium - was just company policy and I could take it or leave it.

    Have you tried Footman James?

    Edit: should have been a reply to @DethBeard

  • After taking out a policy with Hastings a few weeks later they interrogated me re making sure my details entered were correct. Supposedly length of license was off by 1 and they charged me £25 to correct it 😂😭 moral of the story, don't get insurance at 11pm.

  • Carole Nash got my cash, £145 fully comp.
    Better than last years £265 premium.

    I get AA breakdown cover with my wife's bank account so saved a bit by not adding that.

  • Where do you store the bike? I recently started renting a garage which brought the premium down by £100 which was a nice bonus

  • Garaged, in Essex.
    I've "only" had my license 7 years so not got the maximum NCB yet.

    My old bike was sub £90 for a years insurance, I miss that (but do not miss the low power and long gears though)

  • Lols, I was quite pleased to get my insurance under £500 this year!

  • London tax?

  • I need to sell my lwb ducato if you do wish.

  • Would love to but probably overkill for my needs. Arguably I shouldn't be piloting a SWB as it stands! Thanks for the message.

  • Latest garage addition. A cheap slip roll - makes far more replicable tubes and cones than I can by bending the sheet over a mandrel. Requires a bit of fiddling for cones that I need to get the hang of but it’s already an exponential improvement. Did a test piece yesterday and this is with zero manipulation post cuts…far easier to weld.


    3 Attachments

    • 1ABB0531-EF24-4D78-90C2-609849CB1FA7.jpeg
    • E3C6F8C6-30D0-4B69-A19B-01580AF2788C.jpeg
    • 8E86110A-B110-4DFC-BD3D-B2A1605EAA54.jpeg
  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

Motorcycle and Scooter appreciation

Posted by Avatar for coppiThat @coppiThat

Actions