You are reading a single comment by @leggy_blonde and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
leggy_blonde
Zebra
I converted my ebike to single speed, and I used all 1/8 drivetrain parts. I had to get a chain tensioner and it's my first time actually using one. I got the XLC CR-A03.
However, it seems the track chain I'm using is a bit too wide for this tensioner and under stress will rub against the little cage shown in the picture - and the master link, which sticks out about 1mm, rubs against it every single rotation no matter what.
I've not seen anyone mention this online and it seems brands don't even specify if their tensioners are supposed to work with 1/8 or 3/32 chains, which I find strange and leads me to believe it's me who's done something wrong here. Or is this expected?
I really don't want to spend money on a 3/32 cog, chain and chainring now...