You are reading a single comment by @C4r1s and its replies.
Click here to read the full conversation.
-
Do you have a link? Didn’t realise they did one! If it’s Cro-Mo, reckon it’d be ok to be bent a little to 135mm rear (alfine conversion), never wanted to do this with the alu ones
C4r1s-
https://www.sjscycles.co.uk/carriers-racks/nitto-rear-rack-for-brompton-silver
Pretty sure you should be able to use washers to shim it to fit.
If you're keen I could get hold of one.
-
Fitted these to 135mm fine! Just bend the tabs / stays
coventry_eagle
sbbohr
Yes, makes wheeling the bike about much easier.
Nitto one isn't too bad, it's Cr-Mo though so will last longer than standard Brompton but also weigh a bit more.