You are reading a single comment by @Airhead and its replies.
Click here to read the full conversation.
-
It looks great.
I have had some issues with tinted AllCoat. I try to avoid colours on exterior woodwork anyway because any tinted will have a shorter lifespan than gloss white.
Airhead-
thank you! I remember you mentioning the white gloss aspect a while back, but couldn't convince my other half to go with white in the end.
I used the Bulls Eye 123 plus, found it went on without any issues on the PVC, though with roller I was getting very thin coats each time - but much more consistent than using a brush.
Ended up slathering the top coats on with a brush to get a decent build up of paint, and then rolling over to get the streaks out, seemed to work alright in the end.
hvsds
Also on the painting front, almost there with the front of our house.
Had some dustless blasting pros take the paint off the main brickwork a couple of months ago, but the rest done myself as they didn’t touch the little front wall or any of the sandstone.
Zinsser Bulls Eye + All Coat for the door/window frames and masonry sills.
Colours haven’t turned out quite as I’d hoped - the light grey was meant to be a warmer taupe colour - but a lot better than it looked before.
Just done the first coat of double-boiled linseed oil on the bricks, will do another tomorrow and hopefully that’s it for now (pending house number/new PIR light)