You are reading a single comment by @C4r1s and its replies.
Click here to read the full conversation.
-
From a quick look it’s probably 135mm qr. Which was pretty standard before Through Axel came along. Should be some out there eg: https://www.condorcycles.com/collections/disc-hubs/products/condor-supremacy-quick-release-rear-disc-hub. Can also run an adapter (some hubs come with) to change from TA to QR. TA is by far the most common solution now
But be careful what you do for, most modern road and mtb hubs are not interchangeable when fitting a cassette but some of the older stuff (think 10 speed and less) is. If you’re building it up with a road based groupset (105/ultegra etc) then just make sure you get hubs thst for a road cassette vs mtb.
C4r1s
Kalkhoff
Hello! Bought my CDF frameset last month and it's the first bike I'll be building up with discs. I understand the rear hub spacing is 135mm.
Bit baffled as to what wheels fit and I'm not up to standard with modern (discs, 130mm+ hubs) etc etc. Can anyone advise on what fits or can point me in the direction of some sound reading?
Here's a pic of it with some bits bolted on!