You are reading a single comment by @andos and its replies.
Click here to read the full conversation.
-
Thanks @absurdbird - quick question.
Each of these studs/posts is at ~40cm interval aligned with roof rafter and joist so I would likely want to remove maybe 2 on one side of the knee wall. When you say "put another post in out of the way" how would that be supporting the purlin (if they are).
Maybe I could add some photos to help this if needed.
andos
absurdbird
The ‘knee wall’ is probably supporting the purlin (large transverse timber the rafters rest on) the posts you’re seeing may be purlin props/hangers.
Removing one of the studs/posts it probably fine, but if you just need 40mm -put another post in out of the way.
Alternatively you can double up the purlin and remove the knee wall - if you know what you’re doing
If the attics weren’t built as living spaces/bedrooms is likely that the roof had struts and/or collar ties, when these are removed the support for the purlins needs to be beefed up. If the attics were always open rooms then the knee wall was built as part of the roof to support the purlins and in turn the rafters and whole roof.
Tldr?
Don’t remove more than one post.