You are reading a single comment by @markairsy1 and its replies.
Click here to read the full conversation.
markairsy1-
Frame weighs 5.8kg. I’ve calculated the ply is going to weigh 9.5kg. That’s 12mm base and 9mm sides, 12mm seat base and 9mm back. So add in the fasteners and the curvy bits and it’ll be around 16kg.
If I was still at Red Bull I could probably get that down to around 2.5kg if I made it in carbon. And I’d probably get Aero to cast their eye over it as well. Sneak it through the big claves as an R&D experiment on a common cure with some car parts and it probably wouldn’t cost any race wins etc either.
Jonny69
Progress.