You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
gbj_tester
Sram dub crankset installation on a BSA frame, installed with 3mm washer on drive side as per instructions - now the front derailleur, which was set up to work with a GXP bottom bracket, isn't aligned with the crankset. The crankset is several mm too far outboard. Is it as simple a fix as removing the 3mm spacer?