You are reading a single comment by @yoshy and its replies.
Click here to read the full conversation.
-
@Eeyorecore I'd consider picking up something conductive specifically for this (google reckons conductive grease can be found cheap). I reckon the contact pressure should probably be enough that there would still be contact between the metals, but when there are conductive options availably cheap, the extra resistance seems a good thing to try and avoid.
yoshy
Eeyorecore
That's an unfortunately failure mechanism. Try a dab of grease in the female spade next time. it makes it a lot easier to get them on and off. I also try to take them off by pushing from the bottom rather than pulling from the top.
You could consider the coaxial adaptor too if you're taking the wheel in and out a lot.