You are reading a single comment by @fredtc and its replies.
Click here to read the full conversation.
-
could you just buy a longer speedplay axle for one pedal? Assuming the ones you have are 53mm then the 62mm might solve the issue without spacers
fredtc-
I had thought of that. I have 2 sets of Titanium speedplay pedals already, but I could have a upgrade a set of chromo ones with Ti 53 on one side and 56 on the other.
Spindles are more expensive than I thought...
However, I have a Force 11 speed PF30 crank on the way, which I am thinking I'll get a 38t Superstar components direct mount chainring for maximum lightness. Can also then use the Stages crank arm on that.
Acliff
Also anyone know what the maximum width of pedal spacers would be reasonable without dying?
Wondering whether if I kept the vision cranks, but changed the left crank to a Stages carbon crank arm BB386 (which I already have) I'd save a bit of weight while having power data.
I believe the Q factor is 145 on the Stages, and 137 on the Visions.
To match exactly, I'd need 4mm of spacers on the drive side pedal, which would be Speedplay.
I know it should be dead easy to adjust the Speedplay cleat sideways by a couple of mm, but don't want to affect the fit compared to my other bikes.