You are reading a single comment by @IndieStu and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
velosaurus
@IndieStu
So, today I started to set up the shifting. I set the high and low screws, adjustet B-Gap all acording to SRAM instructions. Everything shifts good and smooth so far. The only problem i got is with the 42. It wont stay. It will click up for a second and immediately come back down. I tried a bit. Reinstalled the derailleur, reattached cable, readjusted screw sometime but it wont work.
So I think it could be an issue with the chain line? Since it seems to be because of the sideways pressure. I got the DA Crankset, chainring is on the outside. Did I make a mistake in assuming the normal BB of 113mm here, since I haven't got 2x?
Do I need another BB or is there a solution I just don't see here?