You are reading a single comment by @atk and its replies.
Click here to read the full conversation.
-
I'm running 1x6 at the moment. Can't be much help but can't see why 11 wouldn't work, the only thing to stress is you have to use a TA middle ring in the outer position, not your normal outer ring, because of the way the chainring bolts are recessed. I will get a photo when I next clean this bike if needed.
atk
Is it just different chainrings that make the 0x601 work for 10 speed and 901 work for 11 speed? Or is it more complicated?
I read somewhere that the internal width of 10 and 11 speed chains was the same but really I have no idea.
@andy_k are you running 11 speed with your Zephyrs?
Ideal world would be 11 speed compatible, 110bcd zephyr outer, 74bcd inner, sub 150mm Q factor, and fully non proprietary. That way I could run 11 speed with DT shifters and use these wheels as spares for my road bike (which has 11 speed Sram).