• After building my first set with it I will definitely be getting a second clock, and roller contact points like these , but all in all it worked quite well.

  • After building my first set with it I will definitely be getting a second clock

    Good call.

    and roller contact points like these

    I've got a roller contact point on the lateral run-out DTI, but on the hop DTI I've got a round bar about 35-40mm wide. I think it would be quite annoying having a narrow roller on the hop DTI, especially as I tend to concentrate on hop before run-out, so the rim can be moving around laterally quite a lot at that stage. Pic below.

    but all in all it worked quite well.

    Yay!


    1 Attachment

    • _20200727_221958.JPG
  • I've got a roller contact point on the lateral run-out DTI, but on the hop DTI I've got a round bar about 35-40mm wide. I think it would be quite annoying having a narrow roller on the hop DTI, especially as I tend to concentrate on hop before run-out, so the rim can be moving around laterally quite a lot at that stage.

    That's a very good point, will do this. Did you buy it somewhere or did you make it yourself?

About

Avatar for Brommers @Brommers started