You are reading a single comment by @Tijmen and its replies.
Click here to read the full conversation.
-
After building my first set with it I will definitely be getting a second clock, and roller contact points like these , but all in all it worked quite well.
Tijmen-
After building my first set with it I will definitely be getting a second clock
Good call.
and roller contact points like these
I've got a roller contact point on the lateral run-out DTI, but on the hop DTI I've got a round bar about 35-40mm wide. I think it would be quite annoying having a narrow roller on the hop DTI, especially as I tend to concentrate on hop before run-out, so the rim can be moving around laterally quite a lot at that stage. Pic below.
but all in all it worked quite well.
Yay!
Brommers
Nice, but only one DTI? I find it quite useful being able to measure run out and concentricity at the same time.