You are reading a single comment by @Tijmen and its replies.
Click here to read the full conversation.
-
Ah right, that should be fine then. Cheers!
@grams Yeah it has a mount on the fork.
@freezing77 It's a 26" bike, and that wheel is about as expensive as the bike was. It's not used for much more than a ride to the station or the city center, even a cheap dynamo setup might be overkill.
1 Attachment
-
Tijmen
I think the B&M lights come with bare wire ends, which you can just wrap round the dynamo terminals. It's possibly marginally less reliable than soldering spades and heat shrink, but it requires little fettling, and if it ever goes you just strip a bit of the wiring back and reconnect it.