Dynamo Lights

Current handlebar mount. Not seen is a Nitto canti rack bolt threaded into a recessed brake nut. The arm the light is mounted to is half a Supernova light mount connected to part of a Ritchey stem light mount.

4 Attachments

Can anyone recommend something like the above solution that’s either bar mounted or headset spacer? There’s a lot of options so if anyone has a specific product that just works I’m happy to give that firm my cash
Thanks

I use a Ritchey Universal Stem Mount

1 Attachment

Finally worked out an option

1 Attachment

Thats neat

Clever!

Neat looking.

Does anyone know a 4 core cable not thicker than 5mm suitabe for bike use?

I use a Velogical dynamo which is at the back and curently, to keep everything neat, I use an USB cable to conect dynamo-front light-rear light. Looking for something even neater as I don't quite like the twisted/squashed look of the current cable.

Reckon 4-core alarm cable would do it. Probably get it from B&Q

https://www.amazon.co.uk/Cable-Core-Burglar-Security-System-metres-Black/dp/B005EHY514/ref=mp_s_a_1_1?dchild=1&keywords=4-core+alarm+cable&qid=1592672522&sprefix=4-core+&sr=8-1

can you show the whole cockpit?

B&M do a nylon headset spacer mount that works pretty well.

Thanks @Eeyorecore and @PaddleBoat I’ll go for the later I think as am I right to think I’d need a Ritchey stem for their system?

As seen above on a 3t stem :)

You’d just need a 4 bolt faceplate with easily sourced longer bolts. The actual spacing is adjustable. My wife got rid of hers on the mtb as it kept loosening up however, ymmv.

I've had no issues with it loosening, and yes won't fit all stems.
I have one of these somewhere that I can't see me using anytime soon. Message me if interested
https://www.sjscycles.co.uk/lighting-spares/supernova-multimount-crc-front-light-bracket/

I used the SJS Cycles headset spacer mount but still had to get DIY with the bracketeering.

1 Attachment

.

2 Attachments

Great bike!

About to take frame and racks into my lbs to be built up. Any suggestions for where a dynamo front light can be attached if you’re running a front rack? Doesn’t look like there’s anywhere to attach it to the rack itself..

Use a P-clip.

Thank you. I'll give it a try.

Which rack?

From @seager's advice, I used jubilee clips and still going strong!

https://www.lfgss.com/conversations/159454/?offset=2525#comment15067296

very neat! audax ?

Depending on rack, there is the Nitto 8R & 6R.

This would have been my first year. Had a 200, 300, 600 & 1000 lined up. :-(