You are reading a single comment by @hp93 and its replies.
Click here to read the full conversation.
-
Have you measured the existing one?
Likely a 5 or 4mm. -
other option is to pay £12+ for a new clamp with a bolt and that seems like admitting defeat
If the reduced shank is functionally necessary, you're stuck with getting the complete clamp. SRAM don't list the bolt as a separate spare part.
You could file the threads off the relevant pat of an ordinary screw, which is a cheap fix if you're furloughed but a poor use of your time if you're still doing your day job.
You could pay €17.99 to get Ti replacements from Switzerland and justify the expense as a bling upgrade, plus you'd have a spare if you're running 1×
withered_preacher
gbj_tester
@hp93
Does anyone know the bolt size (/where I can buy them for cheap) for a Sram trigger clamp, my only other option is to pay £12+ for a new clamp with a bolt and that seems like admitting defeat.
1 Attachment