Gravel / Gravé / Gnarmac / Groad / ATB

You are reading a single comment by @Dogs and its replies. Click here to read the full conversation.

•

hippy in reply to @SoYaap

15 -> 12mm is just a sleeve that goes into the hub you can get from all over the place (think mine was off ebay). The SP TA->QR converter is a little bit funkier with machined high and low bits presumably for where the bearings are at.

•

Dogs in reply to @hippy

@snoops - just be mindful that they don't work with every fork, you'll need to check it'll fit in around the end caps if your using a 15-12mm sleeve. Or get handy with a drill and file.

•

hippy in reply to @Dogs

Mine never comes out of the dynamo and the dynamo gets shoved into most of my bikes at some stage. It sits flush with the hub so if it doesn't fit in a fork then neither will the hub.

About

Avatar for Dogs @Dogs started