You are reading a single comment by @fizzy.bleach and its replies.
Click here to read the full conversation.
fizzy.bleach-
If you wanted to run a space heater while welding and testing your PA system you might need to run an extension cable. It was kind of my point that you'll probably get by without an new CU in the garage but if you need a bit more power than the garage circuit can handle you could use one from the house.
In fairness it was you who wanted moar pwr.
-
Depends on the welder.
when welding at a friends parents place had real problems welding as the voltage drop from the house to the garage meant getting decent welds were problematic.
Airhead
lynx
Depends what you are using in the garage.
Edit swaping socket for something like this https://www.qvsdirect.com/13a-30ma-rcd-protected-white-single-double-pole-switched-socket
Or using something like this - https://www.screwfix.com/p/masterplug-rcd-adaptor/63731?tc=CA2&ds_kid=92700038959852098&ds_rl=1241687&ds_rl=1245250&ds_rl=1249401&ds_rl=1245250&gclsrc=ds