Facepalm 😩
Well now I don't know what to do because the pistons were all the way in and there was still no way the disc would fit without rub
The pistons were/are totally flat against the calipers
Maybe there's a half mm to be had will keep trying!
Again, push both piston back in.
If you're struggling, go to your local bike shop.
ive had the exact opposite problem with these brakes.
the gap between the (new) pads and the disc is cavernous! could park a whole other bicycle in there. do i need to get some more oil into them?
@edscoble started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Facepalm 😩
Well now I don't know what to do because the pistons were all the way in and there was still no way the disc would fit without rub
The pistons were/are totally flat against the calipers
Maybe there's a half mm to be had will keep trying!