You are reading a single comment by @MCamb and its replies.
Click here to read the full conversation.
-
other suggestions welcome
New frame?
-
If it'll fit your dropouts I've got a set of (or at least the one with the hanger on it) DMR chain tensions that came with the first generation Trailstar way back when. Run it with a full length of gear outer as a 1x?
Photos are terrible, sorry but if it'll be any use to you drop me a pm and you can take them.
-
If you want to convert this SSMTB in to some kind of do-it-all commuter/shopper/gravel thing then an Alfine is fine, presuming the spacing is around 135mm.
-
Campagnolo part 80/1
gbj_tester
±ln(x)
Howard
Valente
@MCamb
What’s the best (cheapest, easiest) way to adapt a SSMTB to be built up with gears?
My initial thoughts were to braze on gear cable stops and derailleur hanger, but seeing as I can’t seem to find ‘braze on’ derailleur hangers suggests to me it’s not really a done thing.
Internal gear hub ie alfine?
Problem solvers bodge, one of those gear hangers that replaces the qr cap. Looks like it’ll not provide me with the full range of the cassette.
Any other suggestions welcome