You are reading a single comment by @Dogs and its replies.
Click here to read the full conversation.
-
Fit some Shimanos?
Sorry.
-
This might not be what you want to hear but bleed them again. Give the hoods a good few taps with a spanner to move any small bubbles that might still be trapped.
I've bled brakes only to get back on the bike and find that they inexplicably still feel shite. A pain in the tits but a re-bleed almost always sorts it. -
Rebleed the things. Once you're sure there's no more air remove the lower siringe and close it. With the upper siringe try to give some pushes to the brake lever while at the same time pushing more oil in the brake. Close everything and try, if the circuit is too full open at the lever and drop some oil out.
Rhobbs
TotalShanner
Netakure
@Dogs
I've got SRAM Force HRD on my my bike and when I get on it the rear lever pulls all the way to the bar and then after a few squeezes settles back to it's normal position, the front lever also does this but not quite to the extreme. I've bled them and plenty of air came out but it didn't resolve the problem, does any one have any advice?