You are reading a single comment by @Brun and its replies.
Click here to read the full conversation.
-
if you're not using the 705, I would be interested in buying it from you! ta
-
I must admit I thought the Garmins only displayed which number on the cassette you were in. IE 1 or 2 or 3 etc.
If you enable syncro shift on Di2 you set the actual cassette ratios in the e-tube app which then updates the system on the bike so it can calculate how to select the next gear inch you are going up or down the gear inch range (sorry for wording tried but failed to make it clearer). -
Do it on the Garmin.
Go to the Di2 sensor, select sensor settings and you can manually select the cassette range.
platypus
Alan_tbt
amac090
@Brun
Blimey, replacing a ten year old 705 with a 530 is quite a leap. I've figured out the necessities, including getting it talking to my Di2 - swapping pages using the hood buttons is gonna be very handy.
Only thing I'm struggling with is the gear info, which seems to think I'm using an 11-23 cassette and I can't figure out how to change it to 11-28. Wondered if it was getting the cassette specs from the Di2, but it's all showing correctly in the e-tube android app. The chainrings are right, but I'm assuming that's just coincidence.
It's not something that I need, but still annoying me that it's wrong.