You are reading a single comment by @Dammit and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
mcmyk
@Dammit
Ok, if someone could check my working I'd appreciate it.
Recaro specify a maximum insertion into the bucket seat of the bolt that holds said seat to the side mounts, this is 21mm.
The bolts that they supply, with their side mounts, are 20mm, and the side mounts are 4mm.
This suggests that bolt length, - (side mount+washer) = 15mm of bolt needs to thread into the bucket seat.
And finally, with 10mm of spacers, plus 5mm of side mount, I need 30mm bolts to hit the target of 15mm of thread inside the seat.
Does this scan?