You are reading a single comment by @Howard and its replies.
Click here to read the full conversation.
-
If its NX it will be a standard Shimano splined freehub. You’d only want an XD driver if you want to use the cassettes with a 10 T cog.
2018 bike so maybe 148...get the wheel off and check with a tape measure :)
Howard-
https://www.superstarcomponents.com/en/essential-wheels-clearance-boost-15148mm.htm
Many thanks; that was my understanding re: XD and I shall get the tape out shortly.
Looking at a set of these (£100) for next wheels - may go tubeless at some point. Any rims you'd recommend above others? 90kg, beginner but riding a range of trails (50miles a week) and off road terrains with small jumps, some rocky/unstable terrain etc.Cheers
Pasty_Spumante
2018 Voodoo Bokor wheelset
If I wished to change wheels, what spec would I need (think the online specs are old/copied as say 7/8/9/10sp freehub and this is Sram NX 11sp).
148 or 142mm?
Also as the cassette (Sram NX) is 11-42 am I right in thinking Shimano freehub or do I need/want Sram XD driver - does it make a difference?
Cheers