Analog film photography and cameras

You are reading a single comment by @mi7rennie and its replies. Click here to read the full conversation.

•

Lychee
Hello everyone!

So I've recently purchased my first medium format and totally missed the development of my first roll. I had no problem with the 35mm format but I made a lot of 'noob' mistakes with the 120 process, hum.

Here's some pics :
- Kodak HC 110, dilution B (1. 31) for one 35mm roll. The thing is with this dilution, the entire roll was not flooded in the developer. Moreover, I think using the same fixer since June (I developed 15 rolls) didn't help.
Which dilution (with the HC 110 developer) is optimum for developing a 6x7 roll? Which are the differences between the 35mm and 120mm process? Should I change my actual fixer? Thanks guys : )

•

mi7rennie in reply to @Lychee

You can do a clearing test on the fixer, check how long a piece of film takes to clear. It should be now more than 5 minutes.

You need to have the tank full enough that the while film is immersed, apart from that dilution and developer shouldn't matter as long as you follow the instructions.

About

Avatar for mi7rennie @mi7rennie started