You are reading a single comment by @Howard and its replies.
Click here to read the full conversation.
-
Chuck a spacer in if you need more preload. The crank arms are different - it’s not completely surprising there’s a bit of difference.
Howard-
Thanks Howard, I did get the vernier caliper out and the thickness of the arms are the same, looks like its the stock arm with Stages gumpf fitted
I am waiting for the shims to come through the post as non fitted from stock, I have just spoken to Cannondale Spares techie who said that this seems normal and not to use the shim if possible.
Also now refitted the stock arm and its the same, the gap is not the same as it was from the LBS when the bike was new
bur70n_
Don't suppose anyone has a picture or can tell me the gap of the non drive side crank for a CAAD12 still using the BB30, I have taken mine off to fit a Stages arm and it appears to not go as far on as when it was from the LBS.
Seems to show more of the axle, everything is torqued correctly, top image is from LBS and bottom after fitting Stages