You are reading a single comment by @Chak and its replies.
Click here to read the full conversation.
-
Doable. I've done a couple of those and another with a Fox dropper lever. You just need to clamp the cable in with some sort of barrel. I had some old Sturmey Archer barrel clamp I used.
Cable feeds in from 'derailleur' side and up to the shifter. Just gotta find a method to clamp it. Add/release tension. Sorted.
Others soldered brass to the end.
Other solutions will look like this.
Chak
Brought one of these to replace my two speed shifter, have seen them fitted to bromptons online. But was told it wouldn’t fit by lbs, because of the way the cable connects at the derailleur end. Looked online for some info on how others had fitted it, but couldn’t find anything.
Am I missing something, extra piece, some sort of thingyamibob or other, as I’d like to fit this, not a massive fan of the Brompton shifter and would like something smaller on there.
Anyone fitted it and can let me know how you did it?