You are reading a single comment by @hiraethus and its replies.
Click here to read the full conversation.
-
I've been using the 32mm non-TLC GKs on Crests at 45 psi for 8 months with no issues. I'll try the 28s at 50-55 psi to start with and see what happens. As far as I could tell they have a reasonable bead (though not the same square section bead as on the TLC 43 SKs) and were a fairly tight fit on the rims.
hiraethus
Are the non TLC gravel kings ok for tubeless? I'm nervous about the higher pressures needed on skinnier rubber. I'd like to run a 26c front 28c rear on a bike with tight fork clearance, and ideally set them up tubeless, but i'm concerned the 70 or so psi needed will be pushing it.