You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
-
small pump to go on my bike (ideally with a little thing that attaches to the bottle cage bolts) that'll do about 100psi and doesn't screw onto the valve?
This seems to be the current version of the one I've been using for the last 20 years.
gbj_tester-
I have an older version of this one too. I think the last time I needed to use it was nearly 2 years ago but it's always attached to my bike at the bottle cage mount in case. From what I remember of using it, it works fine. 100psi might be hard to reach but is probably doable. No hose so it's handy to use something as a backstop if you're a vigorous pumper.
Colonel_of_Truth
Any suggestions for the best small pump to go on my bike (ideally with a little thing that attaches to the bottle cage bolts) that'll do about 100psi and doesn't screw onto the valve? Had proper hassle today with valve cores getting unscrewed and stuck in my current pump and it's not the first time that's happened.
Doesn't have to be ridiculously expensive, tiny or light, but ideally sturdy and reasonable quality.
Cheers!