The Gas Pipe Stem

-5.5° really?
I am tempted to say +/-6.66° only ;)

That's the equivalent angle of my top tube!

I'd settle for -6

Fair enough. Keep -5 for now and I'll look at it when we start producing them. 0.5 is a tap with a mallet :-)

1) Hulsroy: D 1" / ø31.8 / +-6 / L 130mm / H 85mm
2) Batt: D 1" / ø31.8 / +-0 / L 90mm / H 85mm
3) TomvanHalen: D 1 1/8" / ø26.0 / - 5.5 / L 90(ish) / H 70
4) Heldring: D 1 1/8" / ø31.8 / +- 10 / L 110mm / H 75 mm
5) Packet: D 1 1/8" / øtbc / +- 0 / L 120mm / H 65mm
6) KGrev: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
7) haveo: D 1” / ø25.4 / +-tbc / L 120mm / H 40mm
8) mcamb: D 1 1/8” / ø26.0 / +-tbc /L tbc/ H 40mm
9) spotter: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
10) Joec: D 1 1/8" / ø31.8 / +- 10 / L 100mm / H 60mm
11) t0-ster: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
12) blackmath: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
13) knowthejo: D 1 " / ø26.0 / +-tbc / L tbc / H tbc
14)dimblue: D 1" / ø26.0 / +-tbc / L tbc / H tbc
15) Lanterne Rouge D 1"/ø31.8/+-6/L 115mm/ H TBC
16) Jaap: D 1 1/8" / ø31.8 / +- 10 / L 130mm / H 40mm
17) lmananimal: D 1 " / ø26.0 / +-tbc / L tbc / H tbc (brazed)
18) Thrust: D 1" / ø31.8 / +-tbc / L tbc / H tbc (brazed)
19) Thrust: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
20) blackmath: D 1" / ø26.0 / +-tbc / L tbc / H tbc
21) michaelcox: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
22)Ogg: D 1" / ø31.8 / +-tbc / L tbc / H tbc
23)M_V D 1 1/8" / 31.8/ +- tbc/ L 66.6mm/ H tbc
24)beetletype25: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
25) pastry_bot: D 1" / ø31.8 / +-6 / L 90mm / H 60mm

Knew I should have got in earlier :(

Sorry, bit vague wasn’t I?

I noticed you hadn’t mentioned angle in the first post but you’d put it in the 2nd one and also that people were leaving it at “+-“ whereas I presume you’d need to know if it was “+” or “-“ since these can’t really be flipped?

Also kind of wondered if you’d want them all the same angle or if we could all have different angles.

By “...keep within standard angles...” do you mean like, you put a say, 6deg mitre on the tube and then the choice is just either +6 or -6?

If I can specify the angle, my current stem is listed as 65deg and I have it rising so I presume that’s +25deg?

I realise that’s quite a rise though so I could definitely settle for a lesser angle and use a different bar.

Edit: Still in if +6deg is the steepest I can have.

No worries man. I am pretty sure we can manage making a bit extra.

You are totes right.

PLUS + = stem pointing up
MINUS - = stem pointing down

Any degree should be possible I guess, but I will confirm with Sam tonight.
So in other words, just put what you want and we will look through the list and make a plan.

Nice one cheers.

I’ll copy and paste the list and add my other dimensions once I’m at the pc.

Panic update of numericals

1) Hulsroy: D 1" / ø31.8 / +-6 / L 130mm / H 85mm
2) Batt: D 1" / ø31.8 / +-0 / L 90mm / H 100mm
3) TomvanHalen: D 1 1/8" / ø26.0 / - 5.5 / L 90(ish) / H 70
4) Heldring: D 1 1/8" / ø31.8 / +- 10 / L 110mm / H 75 mm
5) Packet: D 1 1/8" / øtbc / +- 0 / L 120mm / H 65mm
6) KGrev: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
7) haveo: D 1” / ø25.4 / +-tbc / L 120mm / H 40mm
8) mcamb: D 1 1/8” / ø26.0 / +-tbc /L tbc/ H 40mm
9) spotter: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
10) Joec: D 1 1/8" / ø31.8 / +- 10 / L 100mm / H 60mm
11) t0-ster: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
12) blackmath: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
13) knowthejo: D 1 " / ø26.0 / +-tbc / L tbc / H tbc
14)dimblue: D 1" / ø26.0 / +-tbc / L tbc / H tbc
15) Lanterne Rouge D 1"/ø31.8/+-6/L 115mm/ H TBC
16) Jaap: D 1 1/8" / ø31.8 / +- 10 / L 130mm / H 40mm
17) lmananimal: D 1 " / ø26.0 / +-tbc / L tbc / H tbc (brazed)
18) Thrust: D 1" / ø31.8 / +-tbc / L tbc / H tbc (brazed)
19) Thrust: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
20) blackmath: D 1" / ø26.0 / +-tbc / L tbc / H tbc
21) michaelcox: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
22)Ogg: D 1" / ø31.8 / +-tbc / L tbc / H tbc
23)M_V D 1 1/8" / 31.8/ +- tbc/ L 66.6mm/ H tbc
24)beetletype25: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
25) pastry_bot: D 1" / ø31.8 / +-6 / L 90mm / H 60mm

1) Hulsroy: D 1" / ø31.8 / +-6 / L 130mm / H 85mm
2) Batt: D 1" / ø31.8 / +-0 / L 90mm / H 100mm
3) TomvanHalen: D 1 1/8" / ø26.0 / - 5.5 / L 90(ish) / H 70
4) Heldring: D 1 1/8" / ø31.8 / - 10 / L 110mm / H 75 mm
5) Packet: D 1 1/8" / øtbc / +- 0 / L 120mm / H 65mm
6) KGrev: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
7) haveo: D 1” / ø25.4 / +-tbc / L 120mm / H 40mm
8) mcamb: D 1 1/8” / ø26.0 / +-tbc /L tbc/ H 40mm
9) spotter: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
10) Joec: D 1 1/8" / ø31.8 / +- 10 / L 100mm / H 60mm
11) t0-ster: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
12) blackmath: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
13) knowthejo: D 1 " / ø26.0 / +-tbc / L tbc / H tbc
14)dimblue: D 1" / ø26.0 / +-tbc / L tbc / H tbc
15) Lanterne Rouge D 1"/ø31.8/+-6/L 115mm/ H TBC
16) Jaap: D 1 1/8" / ø31.8 / +- 10 / L 130mm / H 40mm
17) lmananimal: D 1 " / ø26.0 / +-tbc / L tbc / H tbc (brazed)
18) Thrust: D 1" / ø31.8 / +-tbc / L tbc / H tbc (brazed)
19) Thrust: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
20) blackmath: D 1" / ø26.0 / +-tbc / L tbc / H tbc
21) michaelcox: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
22)Ogg: D 1" / ø31.8 / +-tbc / L tbc / H tbc
23)M_V D 1 1/8" / 31.8/ +- tbc/ L 66.6mm/ H tbc
24)beetletype25: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
25) pastry_bot: D 1" / ø31.8 / +-6 / L 90mm / H 60mm

1) Hulsroy: D 1" / ø31.8 / +-6 / L 130mm / H 85mm
2) Batt: D 1" / ø31.8 / +-0 / L 90mm / H 100mm
3) TomvanHalen: D 1 1/8" / ø26.0 / - 5.5 / L 90(ish) / H 70
4) Heldring: D 1 1/8" / ø31.8 / - 10 / L 110mm / H 75 mm
5) Packet: D 1 1/8" / øtbc / +- 0 / L 120mm / H 65mm
6) KGrev: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
7) haveo: D 1” / ø25.4 / +-tbc / L 120mm / H 40mm
8) mcamb: D 1 1/8” / ø26.0 / +-tbc /L tbc/ H 40mm
9) spotter: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
10) Joec: D 1 1/8" / ø31.8 / +- 10 / L 100mm / H 60mm
11) t0-ster: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
12) blackmath: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
13) knowthejo: D 1 " / ø26.0 / +-tbc / L tbc / H tbc
14)dimblue: D 1" / ø26.0 / +-tbc / L tbc / H tbc
15) Lanterne Rouge D 1"/ø31.8/+-6/L 115mm/ H TBC
16) Jaap: D 1 1/8" / ø31.8 / +- 10 / L 130mm / H 40mm
17) lmananimal: D 1 " / ø26.0 / +-tbc / L tbc / H tbc (brazed)
18) Thrust: D 1" / ø31.8 / +-tbc / L tbc / H tbc (brazed)
19) Thrust: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
20) blackmath: D 1" / ø26.0 / +-tbc / L tbc / H tbc
21) michaelcox: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
22)Ogg: D 1" / ø31.8 / +-tbc / L tbc / H tbc
23)M_V D 1 1/8" / 31.8/ +24 / L 66.6mm/ H 50mm
24)beetletype25: D 1 1/8" / ø31.8 / +-tbc / L tbc / H tbc
25) pastry_bot: D 1" / ø31.8 / +-6 / L 90mm / H 60mm

We are good to go.
We need people to commit and pay.

Can all the TBC please get measurements sorted so we can proceed.

We keep TIG stems at £50 and fillet brazed at £75 (I believe) and black paint will be £5.
No quills or penis stems.

Height is measured bottom to top.
Length centre to centre.

.

To stop messing this up with replying / requoting list etc. would a Google Sheets be better?

Happy to set up.

Here;

https://docs.google.com/spreadsheets/d/1AH7TzLwwSI2W9OtbYkekYCsGNr1i30T1aTRku9YW7-s/edit?usp=sharing

@Hulsroy you better close that list, you’re going to fuckng HATE stems soon.

Btw steel stems are great and I dig what you are doing there.

What if someone edits someone else's numbers out of spite?

@frankenbike Someone from Hull, say?

I was only joking about Hull being shit. Are you from there or something? I'm from Birmingham myself, pot/kettle/stones/glass houses/etc.

I feel like all I do is go around derailing threads on here. Apologies everyone

You can track changes, but I'm hoping nobody is that much of a cunt ...

PS Hull is shit isnt it?

I'll break their fucking seatpost

I thought so from the one visit but @Skülly seems to disagree. Happy to be proven wrong.

^ Hull apparently