You are reading a single comment by @broken_777 and its replies.
Click here to read the full conversation.
-
Personally I would build the wheels with the correct sized spokes. Because, proper 😂
In case I was going touring and I only wanted to carry same size spares I would just take the shorter spokes. Good enough for emergency and you can repair your wheels properly, once you are back.
You will see spoke elbow failures every now and then. But I have seen very few snapped brass nipples.
broken_777
Cheers, good info. So could I go 16mm nipples all round or will there not be enough thread on the shorter spokes? In a way avoiding the issue of mismatched spoke lengths by having mismatched nipples is a bit silly. Although I assume spokes are much more prone to fail than nipples.