You are reading a single comment by @Skülly and its replies.
Click here to read the full conversation.
-
top tip for using these - clean your frame thoroughly, then dry and it heat the frame up with a hairdryer before applying.
This is good^! I’ve been using Di2 strips for a while on one bike, they work pretty well. I find the standard bi-wire you get with B&M lights doesn’t quite run through the unglued middle channel. Not yet tried with co-axial, but I suspect that these strips are really one-use either wire type - ie if you want to switch wire or light type (SON are pre-wired with no connector) then you need new strips.
If you’re on a budget use gaffer tape.
Skülly
top tip for using these - clean your frame thoroughly, then dry and it heat the frame up with a hairdryer before applying.