You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
-
Can someone who knows about wheelbuilding tell, from the stats here, if I'll be able to reuse the rim and spokes from my SRF 3 build and just swap in the SRF 5?
Yes, the 1mm difference in flange spacing changes the spoke length by such a tiny amount that you old spokes will fit fine. ON the other hand, the SJSC site doesn't match the official SA tech docs, so proceed with caution.
gbj_tester
I've been running the excellent 3 speed Sturmey Archer SRF 3 on my Pompino for maybe 18 months now, and it's great. I have it so the top and bottom gears are something like 70 and 40 inches.
But it's not enough for me to get up steep hills loaded, at the end of a long day when the paths are muddy or what have you.
So I want to get a 5 speed SRF 5, which should allow me, according to Sheldon, a range of roughly 70 to 30 inches. Not a huge difference for the money, but I reckon it will be enough, and it's a lot cheaper than buying a new bike, and I love my Pompino so I'd rather not have to go derailleur.
Can someone who knows about wheelbuilding tell, from the stats here, if I'll be able to reuse the rim and spokes from my SRF 3 build and just swap in the SRF 5? It would keep the cost of changing hubs down significantly. Both would be 36 hole.
https://www.sjscycles.co.uk/hubs-internal-hub-gear-brake/sturmey-archer-srf3-3spd-aluminium-freewheel-hub-36-hole/
https://www.sjscycles.co.uk/hubs-internal-hub-gear-brake/28-hole-sturmey-archer-srf5-5spd-hub/