Rotor 3D24 cranks

Looking for Rotor 3D cranks with 24mm axle.
With or without chainrings... doesn't matter.
Preferably 110bcd, but might agree on 130 as well.

I have a set of Rotor BBright only a few months use, £120; 50/34...170mm

I'm not really familiar with BBright. Is that with a 24mm axle ?
I can't fit a 30mm axle (bb30 etc...) on my frame.

You can fit a 30mm axle into any frame. Rotor make a BSA to 30mm bottom bracket.

Now that's interesting. Didn't know... thanks!

Though there is an issue if you have internally routed Di2 as there is not much space inside the B.B. shell and the threads of the rotor B.B. cups are almost twice as long as shimano ones, so they block the cable routing through the chainstay.

@chris_gee do you have some pictures of the cranks ?
@dancing james ty for info. I won't use di2 though.

I took them off my cervelo when I sold the frame, not used since then.
PM if you are needed close ups etc? Thanks

1 Attachment

Don’t cervelo get rotor cranks made with a proprietary length spindle?

@chris_gee
Sorry Sir, but I'm not a fan of the cervelo color. Will pass. Nice offer though.

BB bright is Cervelo only

BBRight is just 30mm pressfit but as DJ suggests, I think the axle is a different length. BBRight frames have a 79mm wide BB shell and no external cups. This is probably narrower than a 68mm shell with cups either side

Thanks for the info guys!
I've found cranks now, so this should be closed I guess.