-
Most of it is probably useful, except for the oxy fuel cutting wand, unless you're robbing a safe. You will need hoses to join your regulators to the torch. One thing that is worth considering is new regs and flash back arrestor for the torch, they don't age per se but you don't know what life they've had. Never use ptfe tape when trying to solve leaks, they can clog a flash back arrestor very easily and then you're going to have a bad time.
deleted-
Have you seen his previous frame modifications?
-
except for the oxy fuel cutting wand, unless you're robbing a safe.
mwahahaha
new regs and flash back arrestor for the torch
definitely will look into this, as I don't want to compromise on the safety (just want to do it cheaply!)
@dancing james
don't worry I have turned over a new leaf... #teamjdmitch is being [insert metallurgical bonding pun here] with #teamweldaweld
...TBC in a future CP thread
dancing james
jdmitch
I bought some used torch kit, and planning to set up for oxy-propane brazing, but not sure what will be most useful here (and what's what actually) and what else I'll need to buy - any help?