You are reading a single comment by @Netakure and its replies.
Click here to read the full conversation.
-
Is that for tubeless? Seems like a lot to me... Not that going that high in a 40c tyre makes any sense
Netakure-
Is that for tubeless? Seems like a lot to me
That's the #whatpressureyourunning I'm running right now with tubeless Schwalbe Pro One on R24s. It's certainly not going up from there, I think I might even have already gone down half a bar last time out. I used to run 38s on the Pompetamine at 4 bar tubed with about 10kg less lard, but that was a stiff setting for racing on tarmac. If I was going for the same squish as the muddy day setting on the MTB, 38s would come out 2.2 bar F / 3 bar R at my current weight. In the end, as long as you don't exceed the manufacturers limits, there's plenty of room for personal taste.
gbj_tester
DT spec is 5.7 bar for 37mm tyres and 5.5 bar for 40mm, so R24s should take it. Mine only have to tolerate 5 bar F / 6 bar R with 28mm tyres and that's plenty for 115kg all up weight. 38mm tyres at 5 bar is a rear tyre setting for 130kg all up.