You are reading a single comment by @dirac and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
dirac
Base coat dried for about 24 hours before adding the crackle. I crancked up the heat to about 30 Celsius. But the Montana paint dries quite quick anyways. The crackle paint (again, Montana) dried 24hours. Then 3 coats of clear on top of the decals. 2 min between the coats of clear. Again warm room, with pre heated rattle cans. Put them in medium warm water after shaking them. (Paint flows better.) I Also gently sanded with 800 grit paper where the decals was added before putting on the clear.