For Sale: Slam that stem - low stack headset cover

Parallax error

As we've just covered that in class, I totes lold.

Just dropping this in here to start a list, not likely to be any time soon.

Odd sizes:
@user78908 46×4.5

I'd be interested in one of these, if it's possible to do one for one these

if it's possible to do one for one these

In general, they are for integrated headsets only, but I do have a spare cover for a Cane Creek 10 or 40 EC34 which brings the stack of the top half down to under 12mm

go on then. Is it £10 posted?

Is this still going on?
I would love one for my CAAD10 please 47/2
thx

go on then

You want a 44×3? I have no idea whether it will fit that FSA headset, or what it will look like if it does.

Is this still going on?

Yes

I've got a FSA Orbit C-40 No.42 ACB Tapered Headset, is there a cap available instead of the standard 9mm cap?

Upper head tube ID: 42mm
Lower head tube ID: 52mm
Fork crown seat OD: 39.8mm
Stack height: 8.9mm

there a cap available instead of the standard 9mm cap?

Almost certainly, go to the first post in this thread and take measurements

Headtube diameter 49mm

3.2mm from top of headtube to top of compression ring - Including the 0.3mm Subtraction.

Do you have a cap that will fit?

Thanks

I'm putting together an order, so now would be a good time to mention it if you want funny sizes @spotter

Do you currently have any for a CAAD10, 47/2 I believe?

Thanks

Hey how did the cxss head tube measure up?
Wanna get one for mine!

Do you currently have any for a CAAD10, 47/2 I believe?

Yes, in silver or black

Will do tonight, thanks

Hey do you have any caps left that would fit a 46mm od columbus tapered HT? This the cannondale ones work: https://www.tritoncycles.co.uk/components-c9/headsets-c79/5mm-road-top-cap-kit-p7918

If so Black would be great.

Cheers Neil

The Cannondale one will be 47mm. I have 46 & 47 in 2,3 & 4mm depths, see first post in thread for how to measure.

@mdcc_tester any idea what cover would be needed for a BMC SL01 ?

Believe this is the headset https://www.evanscycles.com/bmc-fsa-headset-no-44-EV134711

If possible would like a cover please

Edit- have read the first post and will measure

The police helicopter has been circling over my home for an hour keeping me awake so I've done some measurements in the mean time. Head tube is 57mm wide and it's a little hard to measure the depth as my calipers step gage isn't quite wide enough to bride the gap so I'm getting inconstant measures all the way round - 2.47, 2.77, 2.91, and 3.30 I guess I'd need 3mm and spacers?

Inside of the current conical cover is 2.46 constantly which confirms it I guess

Head tube is 57mm wide

If you need something to reach all the way to the edge of that, it's going to be expensive because I'll have to find some bigger stock especially for you. How big is the existing conical cover?

Also 57mm

How expensive is expensive? Can you recommend an a lower stack OTP option? Maybe I should just have the spacer turned down

How expensive is expensive?

I'll need to check, might be able to blag some stock from the machinist or 2.5" might be big enough to get short lengths rather than full bars from the metal shop, in which case maybe as little as £10 extra.

What's going on under the cover? Would a 48mm cover extend past the bearing OD?

I'm guessing that's a ZS49/28.6 conversion headset, the cone on the Cane Creek 40 in that size is only 8mm high and might be a cheaper option if you can live with the extra 4-5mm stack over full slammage.

I think this is the current headset
http://www.tangeseiki.com/products/headset/is-fully-integrated/is-threadless/is-threadless-tapered-1-1-8-to-1-1-2/146-technoglide-is245.html

The cane creek line up is a bit confusing as to which one i need