You are reading a single comment by @amey and its replies.
Click here to read the full conversation.
-
Are you talking about these?
From the look of it they look like they'll be easy to mount and lock bead on. Not crazy wide either. Is the tape ok? Soapy water?
My Pro Ones went on HED with just a shitty floor pump .. and thats 19mm wide and not as 'modern' as that DT swiss.
amey-
That's the one amey. Haven't done soapy water yet but put sealant around both sides of the bead to help seal. Will report back tonight!
So no one normally needs to push to tyre bead in the groove manually?
@dancing james will look at that if all else fails. I only took the tyre off to patch the inside so they shouldn't have changed.
Thanks @finger_jockey
GrimpeurG
So bought the lifeline pump:
http://www.wiggle.co.uk/lifeline-airblast-tubeless-tyre-track-pump-black-one-size/
Trying my hand at setting my pro ones to my dt swiss 1400 dicut rims. but no joy in seating either bead. I read some people don't even put sealant in until the rim is bedded in. Is it possible to push one side of the bead into the rim? put some sealant round the sides of the rim to aid sealing but that hasn't helped.