You are reading a single comment by @dscorpio and its replies.
Click here to read the full conversation.
-
did the bearings you replaced with have rubber or metal seals? how did you get the snap ring out that hold the roller bearing in place?
dscorpio
mcmyk
I bought a complete bearing kit from a UK seller on eBay, it was £12 delivered.
It's easy enough but you need to heat the Torx bolt to break the loctite on the threads, i used a soldering iron. These bolts round off really easily if you don't heat them to break the loctite and then it's a pain to get sorted.