You are reading a single comment by @deleted and its replies.
Click here to read the full conversation.
-
Sounds like a recipe for problems imhop-you're going to get some moisture build up in the frame no matter what you do and you don't want that coming into contact with your exposed wiring.
deleted-
IIRC with the supernova there is an inner insulation on each wire, he means to strip the outer jacket.
You could take the wire jacket off, I might. Just be very careful, and wary of stripping or cutting the sheithe on the wires accidentally. And I'd get some heat shrink wrap, to put around any exposed parts.
skinny
Thinking about cabling. Was putting in brake/gear cables...don't have light mounts yet, but wondering about space for internally routing dynamo cables. As it is, I'm fairly sure I won't be able to fit the cables in the ducts along with the existing outers.
Can I strip the housing from the dynamo lights, squeeze the wires through, then somehow reattach lengths of outers to the exposed wiring outside of the frame?