You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
-
It should take a 45×2 like nearly every other Cervelo, but one or two seem to have sneaked out of the factory with tall compression rings, so it could be 45×3. Both are in stock.
gbj_tester-
It seems it should be here today, so I'll measure-up and get back to you.
-
I'm struggling a little because it's brand new and the forks are uncut, so I can't bond the sleeve and star nut in, so I can't compress the headset.
I make it 3.3mm and can't see there being over of 1mm of slack (I have got some weight on there, which has taken some of the slack up). The bearing seems quite proud though: I make it 1.7mm above the head tube.
Either way, I'll take a 45x3 please: still £10 posted?
Scilly.Suffolk
The P3C hasn't arrived yet so I can't measure it, but I'm sure you know what's needed: do you have one in stock?