PC Tech Thread

One is a receiver the other is a transmitter, huge difference.
The router has multiple functions such as
One or multiple NICs supporting Fast Ethernet or Gigabit Ethernet integrated into the main SoC
One or multiple WNICs supporting a part of the IEEE 802.11-standard family also integrated into the main SoC or as separate chips on the printed circuit board. It also can be a distinct card connected over a MiniPCI or MiniPCIe interface.

So far the PHY-Chips for the WNICs are generally distinct chips on the PCB. Dependent on the mode the WNIC supports, i.e. 1T1R, 2T2R or 3T3R, one WNIC have up to 3 PHY-Chips connected to it. Each PHY-Chip is connected to a Hirose U.FL-connector on the PCB. A so-called pigtail cable connects the Hirose U.FL either to a RF connector, in which case the antenna can be changed or directly to the antenna, in which case it is integrated into the casing. Common are single-band (i.e. only for 2.4 GHz or only for 5 GHz) and dual-band (i.e. for 2.4 and 5 GHz) antennas.

Often an Ethernet switch supporting Gigabit Ethernet or Fast Ethernet, with support for IEEE 802.1Q, integrated into the main SoC (MediaTek SoCs) or as separate Chip on the PCB.