You are reading a single comment by @Cranky and its replies.
Click here to read the full conversation.
-
Just realised the confusion in my original post I'd written the non-drive side spokes were loose where I meant drive side. Sorry.
Cranky-
Ok, and I didn't read front disc hub, so we're getting there. If the drive side spokes of your front disc wheel are loosening, then disassemble that side, clean threads and lube with linseed before dishing again. If nds spokes are loosening (disc side) then rebuild completely. (And use linseed oil ;) )
Simba
Sorry, I'm a bit confused now.
If the drive side is loosening, I would rebuild completely. If it is the non drive side I would only do that side, and that means the drive side is tensioned. When tightening the nds you will dish the wheel and when it is correctly dished you should have the appropriate tension on both sides.