You are reading a single comment by @Chak and its replies.
Click here to read the full conversation.
-
Remove spacers or you'll shaft the whole thing. Putting spacers won't let the bearings sit flush on the axle and will pull the DS axle through the bearing. Eventually It'll bind the whole thing or it'll chew away at the splines.
This looks like a Dolan issue really. New frames? The old one doesn't have this issue, at least not on mine.
Chak
New Pre Cursa vs Omnium. I thought I shouldn't even need to use the spacer, but even with, this is extremely tight. Any advice?